This STEAM PLA Filament is one of the easiest plastics to print with and has excellent dimension accuracy with minimal shrinkage. The Polylactic acid (PLA) is thermoplastic aliphatic polyester made of renewable resources like corn or starch. Its extrusion-temperature is much lower than ABS and most often doesn't require a heated bed. Each high-quality roll comes on an easy turning plastic spool and is vacuum sealed in an airtight plastic bag with a desiccant inside and packaged in a protective cardboard box so that your plastic is in the best possible condition and free of moisture.
•Green filament weight is 1kg with a print temperature of 205-225 degrees
•Compatible with Ultimaker and other 2.85mm (or 3.0mm/3mm) FDM 3D printers
•Made from renewable sources such as corn or starch
•Filament is high in strength and stiffness which results in minimal shrinkage